• Suddenly unable to log into your ZooVille account? This might be the reason why: CLICK HERE!

General Homesteading thread

OffgridK9lover said:
Chicken breast, salted with a dusting brown sugar and whole salt, Garlic, ginger, rosemerry, thyme, ground in with whole wheat flour, dusted on to the breast. Extra virgin olive oil preheated to smoke temp, drop breast on then reduce heat and cover, slow cook till browned (depends on stove) Take off reheat to smoke temp and flip and repeat.

Enjoy
Click to expand...
Add butter to olive oil. smoking out olive oil alone has a bit of an off putting flavor. Over all, still good. I’d add lemon as well. Great balance.
 
Bloodwolf said:
Add butter to olive oil. smoking out olive oil alone has a bit of an off putting flavor. Over all, still good. I’d add lemon as well. Great balance.
Click to expand...
well you drop it second it just starts, I use it as a temp indicator, and I like the taste personally, all recipes user mileage may vary lol.

But next time will try a dash of butter, I normally use lemon a lot, but usually with beef dishes.
 
OffgridK9lover said:
well you drop it second it just starts, I use it as a temp indicator, and I like the taste personally, all recipes user mileage may vary lol.

But next time will try a dash of butter, I normally use lemon a lot, but usually with beef dishes.
Click to expand...
Lamb and mint jelly. Don’t know who came up with that monstrosity but it tastes so good. Kind of like the Middle Eastern people using cinnamon in beef recipes. Which is also good as hell if done right.
 
Well I just created more work for myself today. Finally got a good mattock to get the stumps out and low and behold 3 of them were sassafras. So root cutting and drying is on the todo list.
 
Off grid problems: The Azimuth drive motor been acting up, I assumed it was the motor (May still be) but then saw no S/N action (tilt) so I checked the brains, no power, so obviously the controller psu is dead. Pull that out, and to my pleasant surprise it seems simple fix, they creatively used an NTC thermister to regulate current to protect the device, that had blown (It is basically a consumable for any dynamic surge loading of the supply is done to it)

But I check the bridge rectifier to make sure no shorts, source replacement. so PSU solved *Possibly.

Now My array is stuck in sun rise home position, I will have to boot strap it with a 20v drill battery and rotate it to noon position, till psu is fixed.

Still need to replace the Azimuth drive with some thing more appropriate, some thing in the range of .5 Degrees per minute rotation.

Best I can do with the gear I have on hand is 0.96 degrees per minute at best, 1.95 Deg /p M worst with out playing with PWM drives (Which caused 3 rather bad failures when interacting with the electromagnetic breaking )
 
Last edited:
And here’s the end result of 6 hours of removal, chopping, boiling in sugar and the addition of a bit of vodka. This is the diluted drink of sassafras. Good fever reduction, eye inflammation, upset stomach and even helps lady cramps. Moderation though. And for you drugies out there, stop fucking it up for everyone ok. IMG_0673.jpeg
 
OffgridK9lover said:
Off grid problems: The Azimuth drive motor been acting up, I assumed it was the motor (May still be) but then saw no S/N action (tilt) so I checked the brains, no power, so obviously the controller psu is dead. Pull that out, and to my pleasant surprise it seems simple fix, they creatively used an NTC thermister to regulate current to protect the device, that had blown (It is basically a consumable for any dynamic surge loading of the supply is done to it)

But I check the bridge rectifier to make sure no shorts, source replacement. so PSU solved *Possibly.

Now My array is stuck in sun rise home position, I will have to boot strap it with a 20v drill battery and rotate it to noon position, till psu is fixed.

Still need to replace the Azimuth drive with some thing more appropriate, some thing in the range of .5 Degrees per minute rotation.

Best I can do with the gear I have on hand is 0.96 degrees per minute at best, 1.95 Deg /p M worst with out playing with PWM drives (Which caused 3 rather bad failures when interacting with the electromagnetic breaking )
Click to expand...
I want to add some solar trackers to my setup soon. By the way, do you have any ideas on how to get rid of the burnt plastic smoke smell? I think I'm going to have to paint or something. :(
 
wishboner said:
I want to add some solar trackers to my setup soon. By the way, do you have any ideas on how to get rid of the burnt plastic smoke smell? I think I'm going to have to paint or something. :(
Click to expand...
Ya remediating that is hard as it is basically plastic oil, you'd need to try a few different soaps geared to cleaning oils and greases, but virtually impossible to fully get rid of it, can try an ozone generator before the electronics is back up and running.
 
OffgridK9lover said:
Ya remediating that is hard as it is basically plastic oil, you'd need to try a few different soaps geared to cleaning oils and greases, but virtually impossible to fully get rid of it, can try an ozone generator before the electronics is back up and running.
Click to expand...
Yeah, that's precisely what I did. That oily smoke has covered everything and won't come off with dawn, vinegar, and water. I bought an ozone generator, too, but read where it can break down rubber and plastics.
 
wishboner said:
Yeah, that's precisely what I did. That oily smoke has covered everything and won't come off with dawn, vinegar, and water. I bought an ozone generator, too, but read where it can break down rubber and plastics.
Click to expand...
Ozone is very harsh stuff, run it in 30m intervals, stop second it gets tolerable, I used them shit tons in building maintenance, so long as you don't go over kill most things handle it fine, the odor molecules eat it up fast then the other stuff reacts usually
 
OffgridK9lover said:
Ozone is very harsh stuff, run it in 30m intervals, stop second it gets tolerable, I used them shit tons in building maintenance, so long as you don't go over kill most things handle it fine, the odor molecules eat it up fast then the other stuff reacts usually
Click to expand...
We had one inside our huge data center, and it made the place smell like a swimming pool most of the time and always gave me a headache. :( The air in there was just filtered and recirculated and no fresh air could get in.
 
wishboner said:
We had one inside our huge data center, and it made the place smell like a swimming pool most of the time and always gave me a headache. :( The air in there was just filtered and recirculated and no fresh air could get in.
Click to expand...
Ack you really do not want to breath that stuff in, it is 10k times more potent than bleach, but very short half life.
 
wishboner said:
I'm sure I lost more than a few brain cells then because sometimes I'd be in there for days trying to fix something. :(
Click to expand...
well if your lungs aren't scared your safe, the stuff oxidizes the shit out of any cell on contact, so burns mucus membranes and oxidative stress through the roof rest of body. lots of vitamin C and other antioxidants are good for ya.
 
OffgridK9lover said:
well if your lungs aren't scared your safe, the stuff oxidizes the shit out of any cell on contact, so burns mucus membranes and oxidative stress through the roof rest of body. lots of vitamin C and other antioxidants are good for ya.
Click to expand...
I've been pretty lucky since COVID hit, and I get to work from home most of the time now or anywhere I can get an internet connection. Only have to visit the datacenter's when we have to move shit. They are even thinking about going to 4 10-hour days! woohoo 3 day weekends! Of course, I'm on call 24/7, but I like to forget that part...
 
OffgridK9lover said:
One way to get assorted roasted fowl delivered to your door as they hit the focal point!
Click to expand...
Yah, that curvature had me wondering just exactly where the FP would be in relation to the terrain.

As I recall, there was (is?) a glass-faced building in London (I'm wanting to say it is/was the one I've heard got nicknamed "the walkie-talkie building" 'cause it looked like a giant glass hand-held comms device) that they had to do something about 'cause one of the faces formed a rather effective solar furnace at certain hours of the day - Effective enough that several cars parked in the vicinity had their plastic parts melted. Dunno if they tore it down, changed the glass, or did something else, but I haven't heard anything about it for at least a couple years now, when for a while, it seemed to get a mention every few days.
 
UR20Z said:
Yah, that curvature had me wondering just exactly where the FP would be in relation to the terrain.

As I recall, there was (is?) a glass-faced building in London (I'm wanting to say it is/was the one I've heard got nicknamed "the walkie-talkie building" 'cause it looked like a giant glass hand-held comms device) that they had to do something about 'cause one of the faces formed a rather effective solar furnace at certain hours of the day - Effective enough that several cars parked in the vicinity had their plastic parts melted. Dunno if they tore it down, changed the glass, or did something else, but I haven't heard anything about it for at least a couple years now, when for a while, it seemed to get a mention every few days.
Click to expand...
1Kw nominal per square meter, so doesn't take much to create a shit load of energy when focused into a point
 

- YouTube

W YouTube możesz cieszyć się filmami i muzyką, które lubisz, przesyłać oryginalne treści i udostępniać je swoim bliskim, znajomym i całemu światu.
www.youtube.com www.youtube.com

I plan to buy or make one unit like this, to maintain the sanitation of my water storage tanks when the system been built. I have a very old unit based on an ignition coil from a vehicle.

I plan to metal coat the inside of an old fluorescent tube, etch off the ends to increase the insulation value, as I want a larger tube for better production and ideal with less heat, for now it is quartz tube stuffed with stainless steel turnings

Need to make a strong coil driver via 555 timer

- YouTube

W YouTube możesz cieszyć się filmami i muzyką, które lubisz, przesyłać oryginalne treści i udostępniać je swoim bliskim, znajomym i całemu światu.
www.youtube.com www.youtube.com

- YouTube

W YouTube możesz cieszyć się filmami i muzyką, które lubisz, przesyłać oryginalne treści i udostępniać je swoim bliskim, znajomym i całemu światu.
www.youtube.com www.youtube.com

Dry air is a way to improve yield with a cheaper unit (Why I been collecting silica gell! Use a second modified tube to make the drying stacks with indicator gell interspersed)
 
Last edited:
OffgridK9lover said:

- YouTube

W YouTube możesz cieszyć się filmami i muzyką, które lubisz, przesyłać oryginalne treści i udostępniać je swoim bliskim, znajomym i całemu światu.
www.youtube.com www.youtube.com

I plan to buy or make one unit like this, to maintain the sanitation of my water storage tanks when the system been built. I have a very old unit based on an ignition coil from a vehicle.

I plan to metal coat the inside of an old fluorescent tube, etch off the ends to increase the insulation value, as I want a larger tube for better production and ideal with less heat, for now it is quartz tube stuffed with stainless steel turnings

Need to make a strong coil driver via 555 timer

- YouTube

W YouTube możesz cieszyć się filmami i muzyką, które lubisz, przesyłać oryginalne treści i udostępniać je swoim bliskim, znajomym i całemu światu.
www.youtube.com www.youtube.com

- YouTube

W YouTube możesz cieszyć się filmami i muzyką, które lubisz, przesyłać oryginalne treści i udostępniać je swoim bliskim, znajomym i całemu światu.
www.youtube.com www.youtube.com

Dry air is a way to improve yield with a cheaper unit (Why I been collecting silica gell! Use a second modified tube to make the drying stacks with indicator gell interspersed)
Click to expand...
Hmm, I just bought a cheap $30(USD) ozone generator that has a 2hr timer on it or constant on mode. I didn't know about the dry air helping. I have a bunch of those silica packets too that I could use. Thanks!
 
Ozone generators are very cheap and easy to build.

I built one years back with a 15kv neon lighting transformer.

Piece of glass, with wire screen on each side, glass being bigger than the screens and a fan blowing over it.

Will actually make way more ozone than most available for purchase, so you have to be a bit careful with it, not just on the amount of ozone it can generate, but 15kv is nothing to play with either!!

Also, activated charcoal will quickly drop the ozone levels.
 
Bloodwolf said:
Why do I believe sparkies took over tthe stead thread?
Click to expand...
Well homesteading you need to sort of do it all if you don't want to spend all your time working for money, and sanitation of water and home is a critical subject.

Ozone does this with out need for chlorine based bleaches and is renewable with just electricity.
 
wishboner said:
Hmm, I just bought a cheap $30(USD) ozone generator that has a 2hr timer on it or constant on mode. I didn't know about the dry air helping. I have a bunch of those silica packets too that I could use. Thanks!
Click to expand...
Just have to heat them at around 180c for a few hours to fully dry them out.
 
OffgridK9lover said:
Just have to heat them at around 180c for a few hours to fully dry them out.
Click to expand...
I'm able to run a dehumidifer in my basement all summer just using solar but the silica packets would good for drying the air for the ozone generator use. They probably wouldn't get hot enough to dry out by just placing them in the sun on something black though. Hmm I do have a small toaster oven that will run off solar too though. Hmm…lol
 
You must log in or register to reply here.
Back
Top