• Suddenly unable to log into your ZooVille account? This might be the reason why: CLICK HERE!

A inflatable cock ring that would allow you to knot with a k9 bitch?

I love the idea, but I have a question, namely how do you control the inflation? You don't want to knot until the end of sex , and you need to get it fully in her before it inflates, and it'd be nice if it was reusable. I'm sure that it could be done, I'm just curious how. If we got any smart people here who can figure out how to make this work then maybe we can get it done.
 
Big Papa Coyote said:
I love the idea, but I have a question, namely how do you control the inflation? You don't want to knot until the end of sex , and you need to get it fully in her before it inflates, and it'd be nice if it was reusable. I'm sure that it could be done, I'm just curious how. If we got any smart people here who can figure out how to make this work then maybe we can get it done.
Click to expand...
There already exist some inflatables toys that you can expand with a little pump. It's not really hard to add a hole in the middle to allow you to put your stick inside.
 
Big Papa Coyote said:
I love the idea, but I have a question, namely how do you control the inflation? You don't want to knot until the end of sex , and you need to get it fully in her before it inflates, and it'd be nice if it was reusable. I'm sure that it could be done, I'm just curious how. If we got any smart people here who can figure out how to make this work then maybe we can get it done.
Click to expand...
Be very careful to not restrict blood flow for that long. We don’t need anything falling off.
 
Huinil said:
There already exist some inflatables toys that you can expand with a little pump. It's not really hard to add a hole in the middle to allow you to put your stick inside.
Click to expand...
Well with the inflatables I think that you just largely slip it inside and then inflate it - I think there should be more at work then just putting a hole in the middle for your dick. First off the material has to be comfortable, your dick is pretty sensitive after all. It has to be able to handle the vigors of sex in a way many inflatables often don't have to. It has to act as a cock ring or just tight enough to stay on during sex when uninflated, yet not cut off your dick's blood supply when you inflate it. That one's actually a toughie, have it start off already condom tight to begin with so it doesn't slip off or slide around during sex, yet doesn't get too tight when it then has to inflate. To remain comfortable during both stages is a tougher trick I think than many realize (like those arm bands that squeeze you when checking your blood pressure at the doctor's). Never mind that inflatables just have you use a pump after you slip it inside yourself or your lover - usually you're not pumping it up right after or while cumming. Do you want to fiddle with a pump during sex? What about the cord, most inflatables don't have to worry about accommodating your dick when they place the air cord connecting the toy and pump. Here the cord will be getting smushed and slapping away between you two.

Just because there are toys that do one of the things that you want, doesn't mean that new problems don't arise when you change it to accommodate a new feature you desire. Just making a hole for your dick in the pre-existing inflatable toy designs might not provide the level of experience you actually want. Putting extra thought in beforehand might get you closer to the experience you're dreaming of.
 
M_barberian said:
Be very careful to not restrict blood flow for that long. We don’t need anything falling off.
Click to expand...
That's exactly my point and one of the main things I'm thinking off. Too much restriction or for too long can lead to irreparable damage. And that ain't funny. For both pleasure and safety it's best to put more serious thought into how it can or should be done before someone goes off and does it half cocked and becomes one of those cautionary internet stories we don't need more of.
 
Big Papa Coyote said:
That's exactly my point and one of the main things I'm thinking off. Too much restriction or for too long can lead to irreparable damage. And that ain't funny. For both pleasure and safety it's best to put more serious thought into how it can or should be done before someone goes off and does it half cocked and becomes one of those cautionary internet stories we don't need more of.
Click to expand...

This is the exact reason why a basic cock ring that expands wouldn’t work.

now, one that attached around the ballsack like a cockcage does, and has a hard-ish ring that doesn’t expand that’s under the expanding portion so as to prevent restricted blood flow would be doable. No different as to how the bad dragon wearables attach/stay in place. Just a lot shorter with most of the shaft exposed and an expandable base that doesn’t put pressure on the cock itself.
 
Shroudedx said:
This is the exact reason why a basic cock ring that expands wouldn’t work.

now, one that attached around the ballsack like a cockcage does, and has a hard-ish ring that doesn’t expand that’s under the expanding portion so as to prevent restricted blood flow would be doable. No different as to how the bad dragon wearables attach/stay in place. Just a lot shorter with most of the shaft exposed and an expandable base that doesn’t put pressure on the cock itself.
Click to expand...
I'm trying to picture this, but I'm sure I'm misunderstanding your post because my head's just conjuring like a small balloon inflating under my dick? It's the around the ballsack thing that's throwing me off. I don't really know how the Bad Dragon wearables work I guess. But I like the idea of a harder ring protecting blood flow.
 
Big Papa Coyote said:
I'm trying to picture this, but I'm sure I'm misunderstanding your post because my head's just conjuring like a small balloon inflating under my dick? It's the around the ballsack thing that's throwing me off. I don't really know how the Bad Dragon wearables work I guess. But I like the idea of a harder ring protecting blood flow.
Click to expand...
So the bad dragon wearable cock sleeves attach by a tight ring around your balls, singular to that of a cock cage. Any cock sleeve that stays put will attach this way. Then whatever material used comes up and wraps around the penis for whatever shape you’re wanting but it isn’t putting unnecessary/constricting pressures on the actual penis as it’s attached elsewhere. This in return would allow you to have an expanding knot that doesn’t have to constrict the penis to stay on.

below is a bad dragon sleeve. Note how it attaches to his balls.
 

Attachments

  • 937240C1-36C3-4C98-8CA7-3BD799033785.jpeg
    937240C1-36C3-4C98-8CA7-3BD799033785.jpeg
    38 KB · Views: 559
Shroudedx said:
So the bad dragon wearable cock sleeves attach by a tight ring around your balls, singular to that of a cock cage. Any cock sleeve that stays put will attach this way. Then whatever material used comes up and wraps around the penis for whatever shape you’re wanting but it isn’t putting unnecessary/constricting pressures on the actual penis as it’s attached elsewhere. This in return would allow you to have an expanding knot that doesn’t have to constrict the penis to stay on.

below is a bad dragon sleeve. Note how it attaches to his balls.
Click to expand...
Okay, now I see it. The balls ring is what holds it in place, but the inflatable bit is still around your penis - but it's over a hard short sheath so as not to constrict the penis.

Yeah I think that's the safest way to make it work. I wouldn't want to make the penis ring/sheath/covering too hard, part of the appeal of a knot I imagine is feeling a little bit of a squeeze down there, you just don't want it to be enough to cut the blood flow at all.

I think someone could easily market two versions of this. One that just has the necessities for the knot and leaves much of your cock bare, and one full penis sheath like the one in your picture so you have what looks like a dog cock plus it has an inflatable knot.

Still have to devise where the pump and cord go to not get in the way of sex. An electronic pump housed inside the toy would be nice but probably too complicated. Certainly for the first model a manual pump would be best.
 
A quick way to get rid of the "cutting the blood flow off" problem would be to make the ring wich attaches to your dick firmer then the inflatable part. You could than use a thin strip of neoprene or something as a cushin between the hard ring and your best thing ? and maybe you can use some strong neodymium magnets to close it around you to remove the need for straps or something else.

The good thing with a balls ring to keep everything in place would be that you can easily route the airhose through it and get it out of the way ?.

The hardest thing would actually be to make the inflating part. I'm planning something like this to convert a masturbator to a wearable like the vixenmaker etc. !
 
Hay Guys I was starting to make a 3d model of such a cockring. But I ran into an problem/question.
To make the hole thing with rigid inlay, inflatable chamber etc I need quite some space... and I was asking myself how much space have I ?

So I need your help how much can I add to the diameter of the cockring based on your/my cock diameter. My cock is around 50mm in diameter if i add 10mm I have 5mm to play with, on each side (if you cut it open) I'm a bit concerned that this isn't enough so what do you think guys ?
 
My wife would definitely get such a cock ring used on her. She loves to tease me about her being fucked by a big muscly dog with a thick long cock
 
Shroudedx said:
This is the exact reason why a basic cock ring that expands wouldn’t work.

now, one that attached around the ballsack like a cockcage does, and has a hard-ish ring that doesn’t expand that’s under the expanding portion so as to prevent restricted blood flow would be doable. No different as to how the bad dragon wearables attach/stay in place. Just a lot shorter with most of the shaft exposed and an expandable base that doesn’t put pressure on the cock itself.
Click to expand...
No offense, I don't think this is a legitimate concern because an erect penis will make room for blood flow.
The amount of pressure is also relative (should be reasonable) and the pussy shares equal amount of pressure.
Saying that the penis falling off is going too far. It's up to the person to inflate it just enough to maintain a tie.
In reality, ties are not 100% secure and dogs do separate when mating is finished.

So if it's a concern, inflate just lightly.

I just don't want this thinking preventing potential inventors from getting past this issue.
 
i have a prototype of this. I make dildos and fleshlights in my free time. using an inflatable silicone ring ,or an inflatable tourniquet has been somewhat successful, using a harder silicone around the shaft base and allowing it to expand around the core. Will post prototype pictures soon.
 
You must log in or register to reply here.
Back
Top