• Suddenly unable to log into your ZooVille account? This might be the reason why: CLICK HERE!

Dog Fleshlight.

I wonder why they don't exist. It would be trivial to add heating, it's as simple as including a resistive wire during initial molding. With usb c being able to supply some serious power, all you'd need on top of that is a usb controller to supply something like 3a at 5v, and possibly a temperature controller, and you can easily simulate the steady body heat of a dog.
 
Mosteel said:
I wonder why they don't exist. It would be trivial to add heating, it's as simple as including a resistive wire during initial molding. With usb c being able to supply some serious power, all you'd need on top of that is a usb controller to supply something like 3a at 5v, and possibly a temperature controller, and you can easily simulate the steady body heat of a dog.
Click to expand...
cost most likely, and potential safty risks (electric shock, possible lacerations from wire)

also silicone is flexible and squishy, wires not so much, which will either lead to a toy that dosnt stretch much, or will break too easily. you cant put the heating wire too deep in the mould because silicone is a great insulator, and wont get all that hot if its too far out.

if you really want a warm hole, either get a real dog, soak the toy under hot water for a bit, or get a sleeve warmer.
 
Mosteel said:
I wonder why they don't exist. It would be trivial to add heating, it's as simple as including a resistive wire during initial molding. With usb c being able to supply some serious power, all you'd need on top of that is a usb controller to supply something like 3a at 5v, and possibly a temperature controller, and you can easily simulate the steady body heat of a dog.
Click to expand...

While silicon is extremely resistant to radiant heat, I'm not so sure how it would fair against direct contact heat, like a thermal wire.

A bit of over-engineering, and probably clunky as shit, but why not take a hint from hot air guns? that could work!

Edit: Run a tube from a Hot Air Rework Station gun, to an air diffuser, into the base of the hard shell around the fleshlight. The warm air should do wonders.
 
JazzyPaws said:
Please do let us know if you test this idea!
Click to expand...
I've actually done a lot of experimenting with, uh, active penetrables; see the videos. Excuse the jankiness inside that silicone sleeve, it was the first thing I ever cast, those videos are heeella old... that was done using a row of air muscles - with water instead of air for better power transfer - connected to a sequence of pistons connected to a crankshaft. It was astonishingly janky and I plan to try a V2 at some point that's just bowden cables with a camshaft at one end to pull them sequentially through loops of expandable cable sleeving around the toy. With said toy having those heating pads cast into the silicone itself, and with stoppers on the cables to prevent any, uh, cinching if something snags. I've had the idea in my head for years though, but RL stuff has kept me from doing anything for a while. I probably will share stuff here somewhere if I find the energy to start this project back up again!

...Ohh, there I go getting all started up again...
 

Attachments

  • 3436.mp4
    7.4 MB
  • 34656.mp4
    7.3 MB
Jaydoglover said:
cost most likely, and potential safty risks (electric shock, possible lacerations from wire)

also silicone is flexible and squishy, wires not so much, which will either lead to a toy that dosnt stretch much, or will break too easily. you cant put the heating wire too deep in the mould because silicone is a great insulator, and wont get all that hot if its too far out.

if you really want a warm hole, either get a real dog, soak the toy under hot water for a bit, or get a sleeve warmer.
Click to expand...
oh! Well... solving electronic design challenges is kinda what i do...
There are many ways to embed wire in a flexible or even stretchy structure! By incorporating a zig zagging coil you can give yourself space to stretch, though to avoid cutting through the silicone, you'll likely want to go with a vertical, say, up and down and up and down pattern. This will allow stretching outwards. And by combing it with the "zig zag" pattern, you can allow for all degrees of stretching with minimal damage to the surrounding material. As for lacerations, coated wire would prevent this risk if an extreme situation ever caused exposed wire.
Electric shocks should not be an issue unless the heating coil, which would be running at a low voltage, breaks. And in that case, the power controller can sense this and deny any attempt at output.
 
JazzyPaws said:
While silicon is extremely resistant to radiant heat, I'm not so sure how it would fair against direct contact heat, like a thermal wire.

A bit of over-engineering, and probably clunky as shit, but why not take a hint from hot air guns? that could work!

Edit: Run a tube from a Hot Air Rework Station gun, to an air diffuser, into the base of the hard shell around the fleshlight. The warm air should do wonders.
Click to expand...
Air heated toys could work... Would lower costs dramatically. One would only have to be a single air heating unit and all the toys would just have the proper tubing.
However at that point... you might as well just boil it. the electric gives it the convenience and control factor. You can get it as warm as a live critter, and keep it there for as long as you want.

Plus, for those who are living with others, having a hot pot in the kitchen with their toy clearly visible in it... may not be ideal.
And hot air stations are *loud*. Dyson spends millions on R&D to get their air blowers quite...r.

(My big one also makes the lights in my house flicker due to odd interference. )
 
Mosteel said:
Air heated toys could work... Would lower costs dramatically. One would only have to be a single air heating unit and all the toys would just have the proper tubing.
However at that point... you might as well just boil it. the electric gives it the convenience and control factor. You can get it as warm as a live critter, and keep it there for as long as you want.

Plus, for those who are living with others, having a hot pot in the kitchen with their toy clearly visible in it... may not be ideal.
And hot air stations are *loud*. Dyson spends millions on R&D to get their air blowers quite...r.

(My big one also makes the lights in my house flicker due to odd interference. )
Click to expand...

The noise is a definite downside. There are pros and cons to both really, I guess we just need an ambitious enough company to make something practical.
 
Diudischki said:
I've actually done a lot of experimenting with, uh, active penetrables; see the videos. Excuse the jankiness inside that silicone sleeve, it was the first thing I ever cast, those videos are heeella old... that was done using a row of air muscles - with water instead of air for better power transfer - connected to a sequence of pistons connected to a crankshaft. It was astonishingly janky and I plan to try a V2 at some point that's just bowden cables with a camshaft at one end to pull them sequentially through loops of expandable cable sleeving around the toy. With said toy having those heating pads cast into the silicone itself, and with stoppers on the cables to prevent any, uh, cinching if something snags. I've had the idea in my head for years though, but RL stuff has kept me from doing anything for a while. I probably will share stuff here somewhere if I find the energy to start this project back up again!

...Ohh, there I go getting all started up again...
Click to expand...
I wanna stick my dick in this hehe. How hard is it to get into silicone penetrable making?
 
Diudischki said:
I've actually done a lot of experimenting with, uh, active penetrables; see the videos. Excuse the jankiness inside that silicone sleeve, it was the first thing I ever cast, those videos are heeella old... that was done using a row of air muscles - with water instead of air for better power transfer - connected to a sequence of pistons connected to a crankshaft. It was astonishingly janky and I plan to try a V2 at some point that's just bowden cables with a camshaft at one end to pull them sequentially through loops of expandable cable sleeving around the toy. With said toy having those heating pads cast into the silicone itself, and with stoppers on the cables to prevent any, uh, cinching if something snags. I've had the idea in my head for years though, but RL stuff has kept me from doing anything for a while. I probably will share stuff here somewhere if I find the energy to start this project back up again!

...Ohh, there I go getting all started up again...
Click to expand...
I'd pay a lot of money for a penetrable anal sex toy that clamps down on your dick
 
furryindisguise123 said:
I'd pay a lot of money for a penetrable anal sex toy that clamps down on your dick
Click to expand...
Currently going through some very... uncertain times; really hoping things stabilize, though. If I manage to get my way, I definitely wanna come back to this project. An anal toy that simulates pushing and clenching is one of the first things I wanna do; the clenching will be easy, but I'll need to figure out... not just how to simulate the pushing, but moreso what I'd even be simulating. In order to replicate the feel, I'll need to know how... well, how buttholes push. :V

I also wanna make a "full-featured" maw toy, most likely modeled off a bear since I like bears; a big bulky muzzle that can yawn open or close snugly, with lips that nurse and suckle, a tongue that wiggles and strokes, and a gullet that actually gulps and ripples. Might sound really complex (...it is) but I already know how I'll pull that one off!

Again though, here's seriously hoping I get the time and peace and freedom to do it.
 
You must log in or register to reply here.
Back
Top