• Suddenly unable to log into your ZooVille account? This might be the reason why: CLICK HERE!

3D printable Toys and Molds

Brianiac

Brianiac

Tourist
I got the idea about a thread to share STLs for printing Toys and Molds for pouring silicone.
Feel free to post your models, or models you found free for private use. No matter it's male or female, nore it's complete or just parts of it. The more the better!

NOTE: All models I post are NOT mine! I just found them some time ago and can't remember where or who has done. All i know is they are free for private use.

Cat.jpgCat_Left_Mold.jpg

EDIT: Sorry can't upload STL files! Tried as .zip but won't work either.:(
 
HurDurDog.jpg

I can't find among my disordered order of chaos the one I made of a dog with a plaster mold, and with cables deliberately used to make vein shapes...
 
I've heard that and the alien ones were stolen and sold to Aliexpress msnufacturers...

@Calydon : Check T.
However, this thread is for 3D printer files, not models.

@Brianiac
STL is text based, right?
Try the old trick of renaming the extension to .txt for upload 😉
 
Last edited:
I've looked and looked and looked... lot's of printable dongs and dildos models (either direct print, or for mold-making), but hardly any zoo penetratables - I think these pretty much have to be molds, because anything printable would be way too hard to stick your dick in (for pleasure, anyways). This is the only one I've found:

smutba.se

3D printable sextoys(mold) (for man only)

3D printable sextoys(mold) (for man only) • Download from smutba.se.
smutba.se smutba.se

Unfortunately, it's a Blender file, and I can't work out how to get the separate pieces out to a slicer (I'm sure it's doable, I just don't have enough facility with Blender). I exported the whole as an .stl, but that doesn't work because it all prints up as one piece. Maybe someone else knows what the right workflow is?

...In the meantime, I've been working on printing out the mold kit for the previously-linked Coil-B2 model "Stroker with girl bits". Just got my silicone in, so will try to make it soon. It's just a human vulva/labia with a straight but bumpy vaginal canal, so not zoo in the least. I'll have to make do with my imagination until I get a workflow down to model/print/cast my own doggie girl pussy. My wife is not into zoo, and is not even that sexually adventuresome, so I am *not* ordering a penetratable - the risk is too high that she'll open it by accident and then I've got awkwardness to deal with.

In fact, I'm thinking about a toy that's plain (or vanilla human) on the outside, but all zoo on the inside. I mean, I don't really care what it looks like *while* my dick is in it. Would be a little safer if found.
 
Last edited:
luvbehe said:
I've looked and looked and looked... lot's of printable dongs and dildos models (either direct print, or for mold-making), but hardly any zoo penetratables - I think these pretty much have to be molds, because anything printable would be way too hard to stick your dick in (for pleasure, anyways). This is the only one I've found:

smutba.se

3D printable sextoys(mold) (for man only)

3D printable sextoys(mold) (for man only) • Download from smutba.se.
smutba.se smutba.se

Unfortunately, it's a Blender file, and I can't work out how to get the separate pieces out to a slicer (I'm sure it's doable, I just don't have enough facility with Blender). I exported the whole as an .stl, but that doesn't work because it all prints up as one piece. Maybe someone else knows what the right workflow is?

...In the meantime, I've been working on printing out the mold kit for the previously-linked Coil-B2 model "Stroker with girl bits". Just got my silicone in, so will try to make it soon. It's just a human vulva/labia with a straight but bumpy vaginal canal, so not zoo in the least. I'll have to make do with my imagination until I get a workflow down to model/print/cast my own doggie girl pussy.
Click to expand...
I wiould not worry much about the inside. Most are just rings and ridges that will be just ok, and the only thing you can do to make it more "bitch" is giving the core an angle or bend in the middle.

The outside, just play with a modelling tool you feel confortable ( Blender, Sculpt...) Just modify it to the desired shape. A positive draft print should give you a good idea of what you are going to get.
luvbehe said:
My wife is not into zoo, and is not even that sexually adventuresome, so I am *not* ordering a penetratable - the risk is too high that she'll open it by accident and then I've got awkwardness to deal with.
Click to expand...
"Darling, I got that for you. I thought it was a flower vase..." 🤣
luvbehe said:
In fact, I'm thinking about a toy that's plain (or vanilla human) on the outside, but all zoo on the inside. I mean, I don't really care what it looks like *while* my dick is in it. Would be a little safer if found.
Click to expand...
As I say, I doubt you'll even find references for the shape inside 🤷

What would be great would be to include a hollow ring, about an inch or two near the entry and use pressure pulses to inflate rithmically... THAT would make it quite a convincing model 🙂
 
Goattobeloved said:
I wiould not worry much about the inside. Most are just rings and ridges that will be just ok, and the only thing you can do to make it more "bitch" is giving the core an angle or bend in the middle.
Click to expand...

The bend is the main thing I was going for.

Goattobeloved said:
What would be great would be to include a hollow ring, about an inch or two near the entry and use pressure pulses to inflate rithmically... THAT would make it quite a convincing model 🙂
Click to expand...

I'm a maker - I'll give some thought to this!
 
luvbehe said:
I'm a maker - I'll give some thought to this!
Click to expand...
Nice!
My thought was doind a thin ring attached to the outside by one thin bar that would later act as entry port.

Main problem being if we plan on removing that mold ring. I can only think of using water soluble filament.... maybe
 
You must log in or register to reply here.
Back
Top